Provide data such as line code violations, path code violations, error seconds and the like.
routerxyz#sh service-module
Interface Serial0/0/0
Module type is T1/fractional
Hardware revision is 1.2, Software revision is 20111206,
Image checksum is 0x4347ED, Protocol revision is 0.1
Receiver has no alarms.
Framing is ESF, Line Code is B8ZS, Current clock source is line,
Fraction has 24 timeslots (64 Kbits/sec each), Net bandwidth is 1536 Kbits/sec.
Last module self-test (done at startup): Passed
Last clearing of alarm counters 5w2d
loss of signal : 3, last occurred 2d17h
loss of frame : 11, last occurred 15:16:47
AIS alarm : 8, last occurred 15:16:47
Remote alarm : 4, last occurred 6d20h
Module access errors : 0,
Total Data (last 96 15 minute intervals):
4 Line Code Violations, 3596 Path Code Violations
2 Slip Secs, 65 Fr Loss Secs, 4 Line Err Secs, 498 Degraded Mins
1185 Errored Secs, 438 Bursty Err Secs, 0 Severely Err Secs, 65 Unavail Secs
Data in current interval (652 seconds elapsed):
0 Line Code Violations, 2 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 2 Degraded Mins
2 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs